Training programs to help our customers grow and prosper.

Please register early as class sizes are limited.  Classes may be cancelled due to low enrollment.

View schedule and Register below.

Classes available only for Armstrong Air and Air Ease dealers.

Includes Lunch

Participants must bring their own meters

This training program will start at the very beginning with volts, ohms, and amps.  We will focus on electrical diagrams and troubleshooting of switches and loads.  The class will also have a “hands-on” session consisting of troubleshooting and basic wiring.  We will also go into great detail of the proper use of meters and how they can assist you in your daily service.

This class is an overview of Armstrong Air furnace offerings (Single-Stage, Two-Stage, Modulating) and discussion relating to individual parts and pieces.  Learn how to properly test gas pressure, pressure switches, and differential pressure.  We will also cover the different circuit boards, fault codes and how to retrieve and clear fault codes and how to program replacement circuit boards.  Finally, we will cover furnace start-up, review of venting, and measuring duct static pressure.

Complete overview of Comfort Sync thermostats including set-up/start-up and equipment testing.  An “on-screen” Comfort Sync simulator will be used for portions of this program.

Comfort Sync Zoning – Discussion and application of Comfort Sync Zoning, installation requirements, XFMR sizing and wiring of dampers, set-up and testing of equipment will be addressed.

Includes study materials mailed in advance

This class includes study materials mailed in advance, review, written exam and grading fees based on the NEW EPA laws.  Review attendance is not mandatory.

Includes lunch both days

This training program has been designed to give the participants a broad introduction to boilers and hydronic heating.  Starting with boiler design and boiler sizing; this course will cover all of the parts and pieces needed for a hot water system including wiring and pump circuits.  Feed water requirements, back flow preventers, expansion tanks, air elimination devices, check valves, pump requirements and sizing, basic near boiler piping and flow rates will also be covered in this program.

This is a very condensed and fast paced program geared towards technicians and installers that need a refresher in air conditioning.  We will review the principles of the refrigeration cycle on R410A systems, heat transfer, pressure/temperature relationships and system components (both mechanically and electrically).  Basic high and low voltage air conditioning circuits, installation procedures, evacuation/charging methods, start-up and service will be covered.  Classroom only program.

Menomonee Falls Location: N50 W13941 Overview Drive • Menomonee Falls, WI

CLASS DATE TIME FEE
Armstrong Air Furnace March 26, 2019 8:00 a.m. – 12:00 p.m. MECP Dealers = FREE

Armstrong/Air Ease = FREE

Comfort Sync / Comfort Sync Zoning March 26, 2019 1:00 p.m. – 5:00 p.m. MECP Dealers = FREE

Armstrong/Air Ease = FREE

A/C Review April 9, 2019 8:00 a.m. – 12:00 p.m. MECP Dealers = FREE

Armstrong/Air Ease = $40

EPA Review & Testing April 16, 2019 8:00 a.m. Review

Test to Follow

$150/Person
HVAC Electrical / Meter Usage

*must bring own meters

April 18, 2019 8:00 a.m. – 4:00 p.m. MECP Dealers = FREE

Armstrong/Air Ease = $75

Hydronics Training April 24th & 25th, 2019 8:00 a.m. – 4:00 p.m. MECP Dealers = FREE

Armstrong/Air Ease = $135

Register for Training Today!

Oshkosh Location: 3255 Fernau Court • Oshkosh, WI

CLASS DATE TIME FEE
HVAC Electrical / Meter Usage

*must bring own meters

April 2, 2019 8:00 a.m. – 4:00 p.m. MECP Dealers = FREE

Armstrong/Air Ease = $75

A/C Review April 10, 2019 8:00 a.m. – 12:00 p.m. MECP Dealers = FREE

Armstrong/Air Ease = $40

Armstrong Air Furnace April 11, 2019 8:00 a.m. – 12:00 p.m. MECP Dealers = FREE

Armstrong/Air Ease = FREE

Comfort Sync / Comfort Sync Zoning April 11, 2019 1:00 p.m. – 5:00 p.m. MECP Dealers = FREE

Armstrong/Air Ease = FREE

Register for Training Today!